CHAPTER 3 Physical Description
panel and the other LED on its rear panel to the left of the left-most FXS port (labeled FXS 49-
72), as shown in the following figures:
Figure 3-12: FXS LED Location on Front Panel per FXS Blade
Figure 3-13: FXS LED Location on Rear Panel per FXS Blade
Color
Green
Orange
Red
-
Table 3-14: FXS LEDs Description
State
On
FXS blade initialization completed and is functioning normally.
On
Some (less than a third) FXS ports are out of service.
On
FXS blade initialization has not completed or a failure detected in the
FXS blade due to any of the following:
■
Multiple FXS ports (more than a third) are out of service
■
DSP failure
Off
No power.
MP-1288 | Hardware Installation Manual
Description
- 15 -