AudioCodes MediaPack Series Hardware Installation Manual page 51

CHAPTER 6 Hardware Maintenance
Figure 6-10: Loosening Screws on FXS Blade on Front Panel
g. Gently pull the FXS blade out of the chassis slot:
Figure 6-11: Removing FXS Blade from Chassis Slot on Front Panel
2. Install the new FXS blade:
a. Hold the blade on the front where the captive screws are located, making sure that
you do not touch the blades electrical components.
b. On the chassis front panel, orientate the FXS blade as shown in the previous figure.
c.
Gently slide the blade into the slot, keeping the left side of the blade aligned with the
left guiding rail located above the captive screw socket, and ensuring that the notch
on the underside of the blade is aligned to the left of the inner guiding rule, as shown
in the following figure. Slide the FXS blade into the slot until it has engaged with the
chassis backplane:
MP-1288 | Hardware Installation Manual
- 45 -