AudioCodes MediaPack Series Hardware Installation Manual page 31

CHAPTER 5 Cabling the Device
MP-1288 | Hardware Installation Manual
Figure 5-7: Orderable FXS Patch Panel
➢ To connect the FXS interfaces using the FXS Patch Panel:
1. Mount the Patch Panel in a 19-inch rack, using the integrated mounting brackets located
on either side of the Patch Panel. Use four 19-inch rack bolts (not supplied) to securely
attach the brackets to the front-rack posts. Make sure that the left and right mounting
brackets are attached to the rack posts at the same level so that the patch panel is
supported in a horizontal position.
- 25 -