Table of Contents
Advertisement
4. Select the communication port activated in TCP-Com and enter the IP address of
the Ethernet port (ETH0 typical) as the "Unit address." See Figure 4-22. The
address data shown is typical; enter the specific data for this TIM application.
Figure 4-22. Typical M
5. Select "OK." The "Dev Tool" will show the available MLK unit(s). See
Figure 4-23
Figure 4-23. Typical M
Copyright 2019
Development System Communications Setup
ICROLOK II
Development System Site Display
ICROLOK II
SM-1H1.0002 Rev. 2, March 2019
TransPortalTM Interlock Monitor
4-23
Advertisement
Table of Contents
