4.4.1.1. Configuring the Local Computer
The data shown in these web page views are only
representative of the configuration data required for a
specific interlocking.
interlocking-specific data for that location.
Each TIM must also be configured with specific network-
and SNMP-host interface parameters for that location.
1. Access the "Local Area Connection Properties" window on the computer being
used. Select "Internet Protocol (TCP/IP)." See Figure 4-15.
Figure 4-15. Typical Local Area Connection Properties
Copyright 2019
NOTE
Each TIM must be configured with
SM-1H1.0002 Rev. 2, March 2019
TransPortalTM Interlock Monitor
4-19