Table of Contents
Advertisement
8mm Video Cassette
An 8mm Video Cassette has a record-protect
tab on the side of the cassette that can be slid
to prevent accidental erasure of recorded
material.
To
prevent
accidental
erasure, slide the record-
protect tab in the direc¬
tion of the arrow until the
tab is completely visible.
To record on the cassette
again, slide the record-
protect tab in the direc¬
tion of the arrow. The tab
will disappear behind the
cassette case.
Record-Protect Tab
NOTE: After unpacking, it is recommended to fast forward tape to its middle and then rewind it
before recording with the camera for the first time.
CAMERA RECORDING
1. Open the case.
Refer to "WATER-RESISTANT" on page 8.
2. Connect
either
one
of
the
"POWER
SOURCES" on pages 16 and 17.
3. Set the
record
mode select switch to
"START/STOP". Refer to "Holding button to
record" on page 23 for the "HOLD TO REC"
position.
4. Press EJECT button and insert the cassette.
NOTE: If the power source is not connected to
camera/recorder, the cassette holder will not
open.
5. Press the cassette holder.
6. Hold the left and right of the case tightly and
lock the buckle securely.
00
Advertisement
Table of Contents
