Table of Contents
Advertisement
4.2.2. Navigating the Embedded Web Server
The embedded web server has a number of navigational tabs along the top of the home
page. Each tab takes you to a different web page, providing convenient local access to
configure the behavior of the TIM. On initial access, the Status configuration tab (See
Section 4.2.2.4.) is shown by default.
• Cellular
• Ethernet
4.2.2.1)
• Wifi
• Networking
Section 4.2.2.2)
• GPS
• Terminal Clients Not used in this application
• Terminal Servers Enable and configure terminal servers (See Section 4.2.2.3)
• Status
data
• Update
• Security
A description of each active web page used in this TIM application and how to view or
configure the page follows.
Copyright 2019
Not used in this TIM application
Configure Ethernet ports ETH0 and ETH1 (See Section
Not used in this TIM application
Open and configure communication ports (See
Not used in this TIM application
View software revision and hardware configuration
(See Section 4.2.2.4)
Update the TIM URL (See Section 4.2.2.5)
Change web password for TIM access (See Section 4.2.2.6)
SM-1H1.0002 Rev. 2, March 2019
TransPortalTM Interlock Monitor
4-3
Advertisement
Table of Contents
