Table of Contents
Advertisement
This manual provides information about the installation and operation of the
TX3-CX Card Access System, and must be read in its entirety before beginning
any installation work.
Installation must be performed by a qualified technician and must adhere to the
standards and special notices set by the local regulatory bodies.
Note:
Warning: The Card Access System must be grounded by a qualified
This chapter explains
•
•
•
•
•
•
•
1.1
Introducing the TX3-CX Card Access System
The TX3-CX Card Access System is part of the Mircom suite of products that
provide building ready monitoring, control and integrated security solutions for
use in the high end multi-tenant residential market.
The Card Access System addresses the need within today's high end multi-tenant
residential market for an easy-to-use tenant access system and an easy-to-use
configuration utility.
TX3-CX Card Access System Installation and Operation Manual
Version 4.1
LT-980
Copyright 2017
Mircom periodically updates panel firmware and Configurator
Software to add features and correct any minor inconsistencies.
For information about the latest firmware or software visit the
Mircom website at www.mircom.com.
electrician. An improperly grounded unit can result in
equipment malfunction and electrical shock.
Introducing the TX3-CX Card Access System
Applications
Configurable Features
Installer Responsibilities
Network Setup
About This Manual
Contact Us
1
Welcome
5
Advertisement
Table of Contents
Need help?
Do you have a question about the TX3 Series and is the answer not in the manual?
Questions and answers