Access Criteria - Mircom TX3 Series Installation And Operation Manual

2.2.6 Duration
The duration of the action is specified in minutes and seconds, or indefinitely.
2.2.7 Schedule
The schedule lets you specify when correlated events take effect.
2.3

Access Criteria

If connected to a PC, the Configurator software monitors the functional state of
inputs from all panels and devices, and senses the status of connected
components. Outputs are programmed for specific functionality, such as specific
delay and on/off times.
Granting access depends on different criteria, such as security precautions and
the access privileges granted the card holder. To prevent unauthorized access the
controller has various configurable features for determining the conditions and
type of access.
Access requirements are a function of schedule, holidays, security precautions
and access privileges. The parameters are configurable and allow for very
detailed system operation. For example access privileges may have dependencies
and consequently may be more suitable to run as a scheduled task.
The Configurator software lets you define and configure the various modes of
operation for managing access, defining inputs and assigning outputs. In order to
effectively use the Configurator you must understand these configurable
features.
The following features are configurable:
•
•
•
•
•
•
•
•
•
•
•
•
TX3-CX Card Access System Installation and Operation Manual
16
LT-980 Copyright 2017
Lock / Unlock
High security
PC decision required
Facility code
Card + PIN
Anti-passback
Temporary card
Interlock
Access Level
Controller options
Access point options
Card options
Configurable Features
Version 4.1