Cmc-Dn01 -- Communication Card, Devicenet - Delta CP2000 Series User Manual

8-8 CMC-DN01
-- Communication card, DeviceNet
8-8-1 Functions
1. Based on the high-speed communication interface of Delta HSSP protocol, able to conduct
immediate control to AC motor drive.
2. Supports Group 2 only connection and polling I/O data exchange.
3. For I/O mapping, supports Max. 32 words of input and 32 words of output.
4. Supports EDS file configuration in DeviceNet configuration software.
5. Supports all baud rates on DeviceNet bus: 125 Kbps, 250 Kbps, 500 Kbps and extendable
serial transmission speed mode.
6. Node address and serial transmission speed can be set up on AC motor drive.
7. Power supplied from AC motor drive.
8-8-2 Product Profile
8-8-3 Specifications
DeviceNet Connector
Interface
Transmission method
Transmission cable
Transmission speed
Network protocol
AC Motor Drive Connection Port
Interface
Transmission method
Terminal function
Communication
protocol
5-PIN open removable connector of 5.08 mm PIN interval
CAN
Shielded twisted pair cable (with 2 power cables)
125 Kbps, 250 Kbps, 500 Kbps and extendable serial transmission speed mode
DeviceNet protocol
50 PIN communication terminal
SPI communication
1. Communicating with AC motor drive
2. Transmitting power supply from AC motor drive
Delta HSSP protocol
8-15
Chapter 8 Option CardsCP2000
1. NS indicator
2. MS indicator
3. POWER indicator
4. Positioning hole
5. DeviceNet connection port
6. Screw fixing hole
7. Fool-proof groove
8. AC motor drive connection
port