Emc-D42A; Emc-D611A; Ac Input Voltage); Emc-R6Aa - Delta CP2000 Series User Manual

8-2 EMC-D42A

-- Extension card for 4-point digital input / 2-point digital input
I/O Extension
Card
MO10–MO11

8-3 EMC-D611A

-- Extension card for 6-point digital input (110V
I/O Extension
Card

8-4 EMC-R6AA

Relay Extension
RA10–RA15
Card
RC10–RC15
Terminals
Common for Multi-function input terminals
Select SINK (NPN) / SOURCE (PNP) in J1
COM
power supply
Refer to Pr.02-26–Pr.02-29 to program the multi-function inputs
MI10–MI13.
Internal power is applied from terminal E24: +24 V
5 W
MI10–MI13
External power +24 V
ON: the activation current is 6.0 mA
OFF: leakage current tolerance is 10 μA
Multi-function output terminals (photocoupler)
The AC motor drive releases various monitor signals, such as drive
in operation, frequency attained and overload indication, via
transistor (open collector).
Common for multi-function output terminals MO10, MO11 (photo
coupler)
MXM
Max 48 V
Terminals
AC AC power Common for multi-function input terminal (Neutral)
Refer to Pr.02-26–Pr.02-31 for multi-function input selection
Input voltage: 100–130 V
Input frequency: 47–63 Hz
Input impedance: 27 kΩ
MI10–MI15
Terminal response time:
ON: 10 ms
OFF: 20 ms
Terminals
Refer to Pr.02-36–Pr.02-41 for multi-function relay selection
Resistive load:
3 A (N.O.) / 250 V
5 A (N.O.) / 30 V
Inductive load (COS 0.4)
1.2 A (N.O.) / 250 V
2.0 A (N.O.) / 30 V
It is used to output each monitor signal, such as drive is in
operation, frequency attained or overload indication.
Descriptions
: max. voltage 30 V
DC
MO10
MO11
MXM
50 mA
DC
input voltage)
AC
Descriptions
AC
Descriptions
AC
DC
AC
DC
8-11
Chapter 8 Option CardsCP2000
jumper / external
± 5% 200 mA,
DC
, min. voltage 19 V
DC DC