Mounting Clearance - Delta CP2000 Series User Manual

Chapter 2 InstallationCP2000

2-1 Mounting Clearance


Prevent fiber particles, scraps of paper, shredded wood saw dust, metal particles, etc. from adhering
to the heat sink.

Install the AC motor drive in a metal cabinet. When installing one drive below another one, use a
metal separation between the AC motor drives to prevent mutual heating and to prevent the risk of
fire accident.

Install the AC motor drive in Pollution Degree 2 environments only:
Normally only nonconductive pollution occurs and temporary conductivity caused by condensation is
expected.
The appearances shown in the following figures are for reference only.
Airflow direction:
Single drive installation (Frame A–H)
Figure 2-1
Multiple drives, single side-by-side
horizontal installation (Frame G, H)
Multiple drives, side-by-side
installation (Frame D0, D, E, F)
Install metal separation between the
drives.
(Blue arrow) Inflow
Side-by-side horizontal installation (Frame A–C)
(Red arrow) Outflow
Figure 2-2
Figure 2-3
Figure 2-4
2-2
Distance