Installation; Unpacking - Michell Instruments XTP501 User Manual

XTP501 & XTC501 User's Manual
4

INSTALLATION

Before installing the analyzer, read through this manual carefully and take note of all
warnings.
4.1

Unpacking

If sold separately (not part of a sampling system), the 501 will be supplied in a custom
box which should be retained for future use (such as service return).
Contents :
• XTP501 or XTC501 Analyzer
• Test result sheet
• Leak test report
• Power supply mating connector (part number XTX501-MCP)
• Signals OUT mating connector (part number XTX501-MCS)
• Signals IN mating connector (part number XTX501-MCSI)
• Alarms mating connector (part number XTX501-MCA)
NOTE : All mating connectors can be supplied with cables fitted, the part number will
be the same as the core connector with the addition of a number at the end, which
corresponds to the length of the cable in metres.
Example :
XTX501-MCS-05 = a Signals OUT mating connector with 5 metres of cable connected.
Please see order code sheet for available options.
Michell Instruments
INSTALLATION
31