Main Menu (Passcode Required); Figure 16 Main Menu Page - Michell Instruments XTP501 User Manual

Oxygen analyzer & binary gas analyzer

Table of Contents

XTP501 & XTC501 User's Manual

2.7

Main Menu (Passcode Required)

In order to change any settings on the User Menu pages, the user must enter a passcode.

There is also a separate passcode for service engineers to allow factory setting changes.

To access the User Menu press the

passcode prompt. Use the

value.

The User Passcode is: 1919

Use the Up () and Down () buttons to select the sub-menu required. Then press the

ENTER button. This will give access to one of the following pages.

Michell Instruments

ENTER

button from the Main Page to call up a

Down

(▲) and

(▼) buttons and press

Figure 16

Main Menu Page

OPERATION

ENTER

after each

Table of Contents

Do you have a question about the XTP501 and is the answer not in the manual?

Xtc501