Power Supply Board - Altronix ACM Series Installation Manual

Fig. 2
Unswitched
115VAC
power mains
(non power-limited)
Optional Rechargeable
12VDC Stand-by Battery
CAUTION: De-energize unit prior to servicing.
For continued protection against fire hazard replace fuse with the same type and rating.
CAUTION: Optional rechargeable stand-by batteries must match
the power supply output voltage setting.
Keep power-limited wiring separate from non power-limited. Use minimum 0.25" spacing.
*When Class 2 rating is required order model numbers:
AL400ULACMCB, AL600ULACMCB, AL1012ULACMCB and AL1024ULACMCB
ACM Series

Power Supply Board

L G N
Input (power-limited)
IN GND IN GND IN GND IN GND
1 2 3
F1 F2 F3
NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM NC C NO COM
OUTPUT 1 OUTPUT 2 OUTPUT 3
DC Output to devices (power-limited for AL400ULACM,
non power-limited for all other models*)
Battery and AC
Supervision Circuit
(power-limited)
AC DC BAT
BAT FAIL NC C NO NC C
TRIGGER
INPUT
IN GND IN GND IN GND IN GND
4 5 6 7 8
F4 F5 F6 F7
OUTPUT 4 OUTPUT 5 OUTPUT 6
ON
NO AC FAIL
FACP
TRG
F8
O N O N
1 2 3 4 1 2 3 4
10A 250V
OUTPUT 7 OUTPUT 8
Optional Rechargeable
12VDC Stand-by Battery
MAIN
- 7 -