Altronix acm8cb Installation Manual

Altronix acm8cb Installation Manual

Acm8 series ul listed sub-assembly access power controllers
Hide thumbs Also See for acm8cb:

Advertisement

Quick Links

ACM8 Series
UL Listed Sub-Assembly
Access Power Controllers
Installation Guide
Models Include:
ACM8
- Eight (8) Fuse Protected Outputs
ACM8CB
- Eight (8) PTC Protected Outputs
More than just power.
TM
Rev. 042811

Advertisement

Table of Contents
loading

Summary of Contents for Altronix acm8cb

  • Page 1 ACM8 Series UL Listed Sub-Assembly Access Power Controllers Installation Guide Models Include: ACM8 - Eight (8) Fuse Protected Outputs ACM8CB - Eight (8) PTC Protected Outputs More than just power. Rev. 042811...
  • Page 2: Specifications

    / accessory power. The FACP Interface enables Emergency Egress, Alarm Monitoring, or may be used to trigger other auxiliary devices. The fire alarm disconnect feature is individually selectable for any or all of the eight (8) outputs. ACM8 and ACM8CB Series Configuration Reference Chart: Protected Class 2...
  • Page 3: Installation Instructions

    [NC] and [C] FACP for normally closed output. Note: This product is a UL Listed Sub-Assembly for use with Altronix UL Listed power supplies as indicated in the installation manuals for the power supply.
  • Page 4: Typical Application Diagram

    Door Holders Intact = One P/S Input Intact = DC Input Cut = Dual P/S Input Cut = AC Input ACM8 ACM8CB J2 J1 NC C NO COM OUTPUT 8 2A 250V 3.5A 250V WARNING: To reduce the risk of fire or electric shock, do not expose the...
  • Page 5: Led Diagnostics

    12VDC or 24VDC input from power supply board. These terminals can be connected to a separate UL Listed power supply to provide isolated -- Control + operating power for the ACM8/ACM8CB (jumpers J1and J2 must be removed). TRIGGER From normally open and/or open collector sink trigger inputs INPUT 1 - INPUT 8 (request to exit buttons, exit pir’s, etc.).
  • Page 6: Hookup Diagrams

    Hook-Up Diagrams: Fig. 3 Polarity reversal input from FACP signaling circuit Fig. 2 Optional hook-up using two (2) isolated output (polarity is referenced in alarm condition): power supply inputs: CUT JUMPERS JUMPER J1 AND J2 FACP FACP OUTPUT EOL ISOLATED POWER INPUT 12 OR 24 VAC OR VDC (ACM8 POWER) FROM FACP...
  • Page 7 Notes: ACM8/CB Sub-Assembly - 7 -...
  • Page 8 Notes: Altronix is not responsible for any typographical errors. 140 58th Street, Brooklyn, New York 11220 USA | phone: 718-567-8181 | fax: 718-567-9056 web site: www.altronix.com | e-mail: info@altronix.com | Lifetime Warranty | Made in U.S.A. MEMBER IIACM8/ACM8CB F06Q - 8 -...

This manual is also suitable for:

Acm8

Table of Contents