C
H A P T E R
This chapter describes how to control access to the switch.
25.1 About Access Control
Click Advanced Application, Access Control from the navigation panel to display the screen
as shown. From this screen you can configure SNMP, up to four web configurator
administrators, enable/disable remote service access and configure trusted computers for
remote access.
Figure 93 Access Control
25.2 Access Control Overview
The following table describes how many concurrent management sessions are permitted when
the multiple login feature is either enabled or disabled.
Table 62 Access Control Overview
Multiple
Login
Enabled
Disabled
With the multiple login feature disabled, a console port access control session and Telnet
access control session cannot coexist. The console port has higher priority. If you telnet to the
switch and someone is already logged in from the console port, then you will see the following
message.
GS-3012/GS-3012F User's Guide
Console port
SSH
One console
SSH and Telnet share 4
port session
sessions.
The console port, SSH and Telnet share one
session. The console port has the highest priority
and Telnet has the lowest priority.
Access Control
Telnet
FTP
One
session
One
session
25
Web
SNMP
Up to five
No limit
accounts
Up to five
No limit
accounts
175