Table 83 Command Summary: Configure Mode (continued)
COMMAND
snmp-server
spanning-tree
ssh
storm-control
syslog
timesync
trunk
vlan
vlan1q
GS-3012/GS-3012F User's Guide
Chapter 32 Introducing the Commands
DESCRIPTION
Disables SSH (Secure Shell)
ssh
server access to the switch.
Disables telnet access to the
telnet
switch.
Removes a configured trap
trap-destination
destination IP address.
<ip>
Disables STP.
Disables STP on listed ports.
<port-list>
Disables the secure shell
key
server encryption key. Your
<rsa1|rsa|dsa>
switch supports SSH
versions 1 and 2 using RSA
and DSA authentication.
Removes all remote hosts.
known-hosts
Removes the specified
known-hosts
remote hosts from the list of
<host-ip>
all known hosts.
Removes remote known
known-hosts
hosts with the specified
<host-ip>
public key (1024-bit RSA1,
[1024|ssh-
RSA or DSA).
rsa|ssh-dsa]
Disables broadcast storm
control.
Disables syslog.
Disables a syslog server
server <ip>
entry.
Enables a syslog server
server <ip>
entry.
inactive
Sets the device to not
type <system,
generate a category of logs.
interface,
switch,
authentication,
ip>
Disables the time setting on
the timeserver.
Disables the specified trunk
<T1|T2|T3|T4|T5|
group.
T6>
Removes ports from the
<T1|T2|T3|T4|T5|
specified trunk group.
T6> interface
<port-list>
Disables LACP in the
<T1|T2|T3|T4|T5|
specified trunk group.
T6> lacp
Deletes the static VLAN
<vlan-id>
entry.
Disables GVRP on the
gvrp
switch.
Disables port isolation.
port-isolation
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
13
227