Chapter 21 Multicast
Your switch automatically creates a static VLAN (with the same VID) when you
create a multicast VLAN in this screen.
Figure 77 MVR
The following table describes the related labels in this screen.
Table 54 MVR
LABEL
Active
Name
Multicast VLAN
ID
802.1p Priority
156
DESCRIPTION
Select this check box to enable MVR to allow one single multicast VLAN to be
shared among different subscriber VLANs on the network.
Enter a descriptive name (up to 32 printable ASCII characters) for identification
purposes.
Enter the VLAN ID (1 to 4094) of the multicast VLAN.
Select a priority level (0-7) with which the switch replaces the priority in outgoing
IGMP control packets (belonging to this multicast VLAN).
GS-3012/GS-3012F User's Guide