ZyXEL Communications GS-3012 Series User Manual page 68

Chapter 6 System Status and Port Details
Table 7 Status: Port Details (continued)
LABEL
TxPkts
RxPkts
Errors
Tx KB/s
Rx KB/s
Up Time
Tx Packet
The following fields display detailed information about frames transmitted.
TX Packets
Multicast
Broadcast
Pause
Tagged
Rx Packet
The following fields display detailed information about frames received.
RX Packets This field shows the number of good frames (unicast, multicast and broadcast) received.
Multicast
Broadcast
Pause
Control
TX Collision
The following fields display information on collisions while transmitting.
Single
Multiple
Excessive
Late
Error
Packet
RX CRC
Length
Runt
Distribution
64
68
DESCRIPTION
This field shows the number of transmitted frames on this port
This field shows the number of received frames on this port
This field shows the number of received errors on this port.
This field shows the number kilobytes per second transmitted on this port.
This field shows the number of kilobytes per second received on this port.
This field shows the total amount of time the connection has been up.
This field shows the number of good frames (unicast, multicast and broadcast)
transmitted.
This field shows the number of good multicast frames transmitted.
This field shows the number of good broadcast frames transmitted.
This field shows the number of 802.3x Pause frames transmitted.
This field shows the number of frames with VLAN tags transmitted.
This field shows the number of good multicast frames received.
This field shows the number of good broadcast frames received.
This field shows the number of 802.3x Pause frames received.
This field shows the number of control received (including those with CRC error) but it
does not include the 802.3x Pause frames.
This is a count of successfully transmitted frames for which transmission is inhibited by
exactly one collision.
This is a count of successfully transmitted frames for which transmission was inhibited
by more than one collision.
This is a count of frames for which transmission failed due to excessive collisions.
Excessive collision is defined as the number of maximum collisions before the
retransmission count is reset.
This is the number of times a late collision is detected, that is, after 512 bits of the frame
have already been transmitted.
The following fields display detailed information about frames received that were in error.
This field shows the number of frames received with CRC (Cyclic Redundant Check)
error(s).
This field shows the number of frames received with a length that was out of range.
This field shows the number of frames received that were too short (shorter than 64
octets), including the ones with CRC errors.
This field shows the distribution of good packets (unicast, multicast and broadcast)
received.
This field shows the number of packets (including bad packets) received that were 64
octets in length.
GS-3012/GS-3012F User's Guide