ZyXEL Communications GS-3012 Series User Manual page 216

Chapter 32 Introducing the Commands
Table 82 Command Summary: Enable Mode (continued)
COMMAND
exit
help
history
igmp-
flush
kick tcp <Session ID>
logout
mac-flush
<port-num>
no arp
interface <port-
number>
logging
ping <ip|host-name>
[<in-band|out-of-
band|vlan <vlan-
id>]
[size <0-1472>]
[-t]
216
DESCRIPTION
Resets to the factory default
interface port-
settings on a per port basis.
channel <port-
list>
Resets to the factory default
interface port-
settings on a per port basis and
channel <port-
optionally on a per feature
list> [[active]
configuration basis.
[name]
[speed-duplex]
[bpdu-control]
[flow-control]
[intrusion-lock]
[vlan1q]
[vlan1q-member]
[bandwidth-limit]
[port-security]
[broadcast-storm-
control]
[mirroring]
[port-access-
authenticator]
[queuing-method]
[igmp-filtering]
[spanning-tree]
[mrstp]
[port-based-
vlan]]
Exits the CLI.
Displays help information.
Displays a list of command(s) that
you have previously executed.
Removes all IGMP information.
Drops a TCP session.
Exits the CLI.
Clears the MAC address table.
Removes all learned MAC
address on the specified port(s).
Flushes the ARP (Address
Resolution Protocol) table.
Clears the interface status of the
specified port(s).
Clears the system log.
Sends a Ping request to an
Ethernet device.
PRIVILEGE
13
13
13
13
13
13
13
13
13
13
13
13
13
13
GS-3012/GS-3012F User's Guide