Figure 51 Rstp: Configuration; Table 27 Rstp: Configuration - ZyXEL Communications GS-3012 Series User Manual

Figure 51 RSTP: Configuration

The following table describes the labels in this screen.

Table 27 RSTP: Configuration

LABEL
Status
Active
Bridge Priority
Hello Time
GS-3012/GS-3012F User's Guide
DESCRIPTION
Click Status to display the RSTP Status screen (see
Select this check box to activate RSTP. Clear this checkbox to disable RSTP.
Bridge priority is used in determining the root switch, root port and designated port.
The switch with the highest priority (lowest numeric value) becomes the STP root
switch. If all switches have the same priority, the switch with the lowest MAC
address will then become the root switch. Select a value from the drop-down list
box.
The lower the numeric value you assign, the higher the priority for this bridge.
Bridge Priority determines the root bridge, which in turn determines Hello Time,
Max Age and Forwarding Delay.
This is the time interval in seconds between BPDU (Bridge Protocol Data Units)
configuration message generations by the root switch. The allowed range is 1 to 10
seconds.
Chapter 11 Spanning Tree Protocol
Figure 52 on page 109).
107