Filtering; Chapter 10 Filtering; Introduction To Filtering; Configuring A Filtering Rule - ZyXEL Communications GS-3012 Series User Manual

C
H A P T E R
This chapter discusses static IP and MAC address port filtering.

10.1 Introduction to Filtering

Filtering means sifting traffic going through the switch based on the source and/or destination
MAC addresses and VLAN group (ID).

10.2 Configuring a Filtering Rule

Click Advanced Application and Filtering to display the screen as shown next.

Figure 47 Filtering

The following table describes the related labels in this screen.

Table 22 Filtering

LABEL DESCRIPTION
Active Make sure to select this check box to activate your rule. You may temporarily deactivate a
rule without deleting it by deselecting this check box.
Name Type a descriptive name for this filter rule. This is for identification purpose only.
GS-3012/GS-3012F User's Guide
10

Filtering

101