Table 83 Command Summary: Configure Mode (continued)
COMMAND
unknown-multicast-
frame
<drop|flooding>
interface
port-channel
<port-list>
ip
address
address default-
gateway
name-server
route
lacp
system-priority
loginPreceden
<LocalOnly |
ce
LocalRADIUS |
RADIUSOnly>
logins
username <name>
password <pwd>
username <name>
privilege <0-14>
logout
mac-aging-
<10-3000>
time
mac-filter
name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
name <name> mac
<mac-addr> vlan
<vlan-id> drop
<src/dst/both>
inactive
GS-3012/GS-3012F User's Guide
Chapter 32 Introducing the Commands
DESCRIPTION
Sets how to treat traffic from
unknown multicast group.
Enables a port or a list of
ports for configuration. See
Section 32.10.5 on page 233
for more details.
Sets the IP address and
<ip> <mask>
subnet mask of the out-of-
band management port.
Sets the default gateway's IP
<ip>
address for the out-of-band
management port.
Sets the IP address of a
<ip>
domain name server.
Creates a static route.
<ip> <mask>
<next-hop-ip>
Sets the metric of a static
<ip> <mask>
route or deactivates a static
<next-hop-ip>
route.
[metric
<metric>] [name
<name>]
[inactive]
Enables Link Aggregation
Control Protocol (LACP).
Sets the priority of an active
<1-65535>
port using LACP.
Select which database the
switch should use (first) to
authenticate a user.
Configures up to four read-
only login accounts.
Sets the access privilege for
the existing login accounts.
The higher the value, the
more commands are allowed.
Exits the CLI.
Sets learned MAC aging
time.
Configures a static MAC
address port filtering rule.
Disables a static MAC
address port filtering rule.
PRIVILEGE
13
13
13
13
13
13
13
13
13
14
14
14
13
13
13
13
223