Figure 29 Status: Port Details; Table 7 Status: Port Details - ZyXEL Communications GS-3012 Series User Manual

Zyxel gigabit ethernet switch user's
Hide thumbs Also See for GS-3012 Series:
Table of Contents

Advertisement

Figure 29 Status: Port Details

The following table describes the labels in this screen.

Table 7 Status: Port Details

LABEL
Port Info
Port NO.
Name
Link
Status
LACP
GS-3012/GS-3012F User's Guide
DESCRIPTION
This field identifies the Gigabit port described in this screen.
This field displays the port name you configured in the Port Setup screen.
This field shows whether the port connection is down, and the speed/duplex mode. It
also shows the cable type (Copper or Fiber) for the combo ports.
If STP (Spanning Tree Protocol) is enabled, this field displays the STP state of the port
(see
Section 11.1.3 on page 105
If STP is disabled, this field displays FORWARDING if the link is up, otherwise, it
displays STOP.
This field shows if LACP is enabled on this port or not.
Chapter 6 System Status and Port Details
for more information).
67

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gs-3012f series

Table of Contents