Figure 47 Rstp: Configuration; Table 26 Rstp: Configuration - ZyXEL Communications ZyXEL Dimension ES-3148 User Manual

Figure 47 RSTP: Configuration

The following table describes the labels in this screen.

Table 26 RSTP: Configuration

LABEL
Status
Active
Bridge Priority
Chapter 11 Spanning Tree Protocol
DESCRIPTION
Click Status to display the RSTP Status screen (see
Select this check box to activate RSTP. Clear this checkbox to disable RSTP.
Bridge priority is used in determining the root switch, root port and designated port.
The switch with the highest priority (lowest numeric value) becomes the STP root
switch. If all switches have the same priority, the switch with the lowest MAC
address will then become the root switch. Select a value from the drop-down list
box.
The lower the numeric value you assign, the higher the priority for this bridge.
Bridge Priority determines the root bridge, which in turn determines Hello Time,
Max Age and Forwarding Delay.
ES-3148 User's Guide
Figure 48 on page 113).
111