Menu 1 - General Setup contains administrative and system-related information.
23.1 General Setup
Menu 1 — General Setup contains administrative and system-related information (shown next). The
System Name field is for identification purposes. However, because some ISPs check this name you
should enter your computer's "Computer Name".
In Windows 95/98 click Start, Settings, Control Panel, Network. Click the Identification tab, note
the entry for the Computer name field and enter it as the Prestige System Name.
In Windows 2000 click Start, Settings, Control Panel and then double-click System. Click the
Network Identification tab and then the Properties button. Note the entry for the Computer name
field and enter it as the Prestige System Name.
In Windows XP, click start, My Computer, View system information and then click the Computer
Name tab. Note the entry in the Full computer name field and enter it as the Prestige System Name.
The Domain Name entry is what is propagated to the DHCP clients on the LAN. If you leave this
blank, the domain name obtained by DHCP from the ISP is used. While you must enter the host name
(System Name) on each individual computer, the domain name can be assigned from the Prestige via
DHCP.
23.2 Procedure To Configure Menu 1
Enter 1 in the Main Menu to open Menu 1 — General Setup (shown next).
System Name= ?
Location=
Contact Person's Name=
Domain Name=
Edit Dynamic DNS= No
Route IP= Yes
Bridge= No
Press ENTER to Confirm or ESC to Cancel:
Fill in the required fields. Refer to the table shown next for more information about these fields.
Menu 1 General Setup
Menu 1 General Setup
Menu 1 - General Setup
Figure 23-1 Menu 1 General Setup
Prestige 662HW Series User's Guide
Chapter 23
23-1