Configuring Vpn Global Setting - ZyXEL Communications P-792H User Manual

Chapter 12 VPN
12.9.7 on page 178
when the SA lifetime expires, even if there is no traffic.
Figure 76 Security > VPN > Monitor
The following table describes the fields in this screen.
Table 47 Security > VPN > Monitor
LABEL
No
Name
Encapsulation
IPSec
Algorithm
Disconnect
Refresh

12.8 Configuring VPN Global Setting

To change your P-792H v2's global settings, click VPN > VPN Global Setting.
The screen appears as shown.
Figure 77 Security > VPN > Global Setting
172
on keep alive to have the P-792H v2 renegotiate an IPSec SA
DESCRIPTION
This is the security association index number.
This field displays the identification name for this VPN policy.
This field displays Tunnel or Transport mode.
This field displays the security protocol, encryption algorithm, and
authentication algorithm used in each VPN tunnel.
Select one of the security associations, and then click Disconnect to
stop that security association.
Click Refresh to display the current active VPN connection(s).
P-792H v2 User's Guide