Check For A Faulty Assembly; A15Wl Plug Detail - HP 8753E Service Manual

Check for a Faulty Assembly

This procedure checks for a faulty assembly that might be shutting down the
n
the + 5 VCPU line through the motherboard
n
the +5 VDIG line through the motherboard
n
Do the following:
1. Switch off the analyzer.
2. Ensure that A15Wl is reconnected to A8. (Refer to Figure 5-5.)
Remove or disconnect the assemblies listed in 'lhble 5-3 one at a time
3.
and in the order shown. The assemblies are sorted from most to least
accessible. Table 5-3 also lists any associated assemblies that are supplied
Figure 5-6. A15Wl Plug Detail