HP 8753E Service Manual page 425

PWR MTR: NOT ON/CONNECTED OR WRONG ADDRS
Error Number The power meter cannot be accessed by the analyzer. Verify
117 that the power meter address and model number set in the
analyzer match the address and model number of the actual
power meter.
SAVE FAILED. INSUFFICIENT
Error Number You cannot store an instrument state in an internal register due
151 to insufficient memory. Increase the available memory by
clearing one or more save/recall registers and pressing m, or
by storing files to a disk.
FAILED
Service Error Internal test #n has failed. Several internal test routines are
Number 112 executed at instrument preset. The analyzer reports the first
self-diagnose feature descriptions earlier in this chapter.
Information You have exceeded the maximum power level at one of the
inputs and power has been automatically reduced. The
Message
annotation P+ indicates that power trip has been activated.
When this occurs, reset the power and then press LMenu) &J@
. . . . . . . . . . . . . . . . . ; . ; , . , . , . , ; . . . . . . . . : : . . . . . . . . . . . . . . . . . . . . . . . . . . : : : : . . . . . . . . . . . . . . . . . .
follows error numbers 57, 58, and 59.
MEMORY
. . . . . . . . . , , . . . . . . . . . . ; . . .
Service Key Menus and Error Messages