HP 8753E Service Manual page 559

n
n
ESD (electrostatic discharge) grounding wrist strap
n
Removal
1. Disconnect the power cord.
2. Remove the top cover (refer to "Covers" in this chapter) and front panel
(refer to "Front Panel Assembly" in this chapter.)
3. Remove the six screws (item 1) from the GSP cover (item 2) and lift off.
4. Swing out the handles (item 3) and pull the GSP board (item 4) out of the
Replacement
1. Check the connector pins on the motherboard before reinstaktion.
2. Reverse the order of the removal procedure.
1 4 4 4 Assembly Replacement and Psi-Repair Procedures