Xerox B205 User Manual page 218

Symptoms
Character Voids
Horizontal stripes
Curl
An unknown image
repetitively appears on
a few sheets or loose
toner, light print, or
contamination occurs.
Solutions
Character voids are white areas within parts of characters that should be solid black:
• If you are using transparencies, try another type of transparency. Because of the
composition of transparencies, some character voids are normal.
• You may be printing on the wrong surface of the paper. Remove the paper and
turn it around.
• The paper may not meet paper specifications.
If horizontally aligned black lines, stripes, streaks or smears appear:
• The toner cartridge may be installed improperly. Remove the cartridge and
reinsert it.
• The toner cartridge may be defective. Remove the toner cartridge and install a
new one. For details, refer to
• If the problem persists, the printer may require repair. Contact a service
representative.
If the printed paper is curled or paper does not feed into the printer:
• Turn the stack of paper over in the tray. Also try rotating the paper 180° in the
tray.
• Change the printer option and try again. Go to Printing Preferences, click Paper
tab, and set type to Light weight.
• Your printer is probably being used at an altitude of 1,500 m (4,921 ft) or above.
• The high altitude may affect the print quality, such as loose toner or light
imaging. Change the altitude setting for your printer. For details, refer to
Machine Setup.
Replacing the Toner Cartridge.
Xerox B205 Multifunction Printer
®
Print-Quality Problems
216
User Guide