Raw Tcp/Ip Printing - Xerox B205 User Manual

Raw TCP/IP Printing

Raw TCP/IP is used to open a TCP socket-level connection over Port 9100, and stream a print-ready file
to the printer input buffer. It then closes the connection either after sensing an End Of Job character in
the PDL or after expiration of a preset timeout value. Port 9100 does not require an LPR request from
the computer or the use of an LPD running on the printer. Raw TCP/IP printing is selected in Windows
as the Standard TCP/IP port.
Note: When configuring settings in Properties, you will be prompted to enter the Administrator
account user name and password. For information about logging in as an administrator, refer to
Accessing the Xerox® CentreWare® Internet Services Administrator
Configuring Raw TCP/IP Settings Using Xerox
Services
1. In Xerox CentreWare
®
2. Click Raw TCP/IP Printing.
3. For Protocol, select Enable.
4. Ensure that Port Number is set to 9100.
Click Apply.
5.
Internet Services, click Properties
®
Network Connectivity
Account.
CentreWare
® ®
Connectivity Protocols.
 
Xerox B205 Multifunction Printer
®
Internet
65
User Guide