Xerox B205 User Manual page 189

Message
Open Fuser error
Low Heat error
Over Heat error
Motor error Turn off
then on
LSU Motor error
LSU Hsync Error
UI Error
Tray 1
Paper Mismatch
Manual
Paper Mismatch
Invalid USB device
USB Memory is Full
Paper Jam in Bypass
Paper Jam in Tray1
Jam inside machine
Meaning
During operation, the fuser is
not reaching operational
temperature.
The fuser temperature is too
high.
A device error has occurred.
A communication error has
occurred.
There is a mismatch with the
settings and the paper loaded
in the in tray 1.
There is a mismatch with the
settings and the paper loaded
in the in the manual feed slot.
An incompatible USB device
has been detected.
The memory is full in the USB
drive inserted into the device.
There is a jam in the manual
feed slot.
There is a jam in tray 1.
Jam in the device
Suggested Solutions
• Power off the device, then power on the
again.
• If the problem persists, call for Service.
• Power off the device, then power on the
again.
• If the problem persists, call for Service.
• Power off the device, then power on the
again.
• If the problem persists, call for Service.
Ensure that the correct Paper Size, Type and
Color is loaded in tray 1.
Ensure that the correct Paper Size, Type and
Color is loaded in the manual feed slot.
Remove the USB device and install a compatible
USB device.
• Check the amount of USB memory.
• Delete files to increase the available memory.
1. Remove the jammed sheets from the
manual feed slot.
2. Remove and reload the remaining stack of
paper in the manual feed slot.
For further information, refer to
Jams at the Manual Feed
1. Open tray 1.
2. Remove jammed paper.
3. Close the tray
For further information, refer to
Jams from Tray 1.
1. Open the front cover.
2. Remove any paper.
3. Close the door.
For further information, refer to
Jams from Inside the Printer.
Xerox B205 Multifunction Printer
®
Overview
Clearing Paper
Slot.
Clearing Paper
Clearing Paper
187
User Guide