Xerox B205 User Manual page 191

Message
Lock is exist
Filename is too long
Scan file is exist
BOOTP problem Auto
IP Run
BOOTP problem
802.1x
Network Error
Upgrade Error Reset
Printer
Meaning
The folder already exists in the
file location.
The filename is too long and
file access has been denied.
A duplicate filename exists.
A BOOPT server error has
occurred.
There is an 802.1X
authentication error
There is a problem with the
firmware upgrade.
Suggested Solutions
• The device cancels the job. Change the
settings for the job, then try the job again.
• If the problem persists, contact your System
Administrator.
• The device cancels the job. Change the
settings for the job, then try the job again.
• If the problem persists, contact your System
Administrator.
• The device cancels the job. Change the
settings for the job, then try the job again.
• If the problem persists, contact your System
Administrator.
• Input a new static IP address.
• If the problem persists, contact your System
Administrator.
Ensure that the 802.1X EAP Type, Username and
Password, Authentication Switch and
Authentication Server for the Device are
compatible.
Install the correct firmware. For further
information, refer to Software
Xerox B205 Multifunction Printer
®
Overview
Updates.
189
User Guide