Xerox B205 User Manual page 162

3. Load the envelope short edge feed and with the flap
facing down as shown in the illustration.
4. Adjust the paper guide to the width of the print material.
Note: If the media prints with curl, wrinkles, a crease, or
black bold lines, open the rear cover and print again.
5. After loading paper, if prompted, verify the paper size
and type settings on the screen. To keep the same
settings, press OK. To change the settings, press the
down arrow, then press OK and adjust the settings:
• To select a paper size, press the up/down arrows to
select Paper Size, then press OK. Press the up/down
arrows to select the paper size you want, then press
OK.
• To select a paper type, press the up/down arrows to select Paper Type, then press OK. Press
the up/down arrows to select the paper type you want, then press OK.
6. When printing from your computer, ensure you select the Paper option in the print driver to
specify the correct paper size and type. For the source, you must select Manual Feed Slot. Not
confirming the paper details may result in printing delays. For information about setting the paper
type and size on the control panel, refer to
Note: The settings made from the print driver on your computer override the settings on the
control panel.
Setting Paper Size and
Xerox
®
Loading Paper
Type.
B205 Multifunction Printer
User Guide
160