AXIOMTEK CAPA520 User Manual page 9

 USB Interface
 Four USB ports on the rear I/O:
- H310 chipset: Three for USB 3.0 and one for USB 2.0.
- Q370 chipset (optional): Three for USB 3.1 Gen2 and one for USB 2.0.
 Two USB 2.0 ports in 2x5-pin internal wafer connector.
 Display
 One DisplayPort. Max. resolution is 4096x2160 @60Hz.
 One 2x20-pin connector for 18/24-bit single/dual channel LVDS and one 8-pin
inverter connector. LVDS resolution is up to 1920x1200 in 24-bit dual channels.

One HDMI. Max. resolution is 4096x2160 @30Hz.
 Watchdog Timer
 1~255 seconds or minutes; up to 255 levels.

Ethernet
 LAN1: Intel
Wake-on-LAN and PXE Boot ROM.
 LAN2: Intel
Wake-on-LAN and PXE Boot ROM.
 LAN3: Intel
Wake-on-LAN and PXE Boot ROM.
 Audio

HD audio link without codec.
 1x8-pin 1.0mm wafer HDA signal to support expansion audio board AX93A22.
 Expansion Interface
 One full-size PCI-Express Mini Card socket complies with PCI-Express Mini Card
Spec. V1.2.
 ZIO Connector
 60-pin high speed connector; containing one PCI-Express x1, one USB 2.0, one
USB 3.1 Gen1, one LPC and one SMBus.
 Power Input
 One 2x2-pin connector.
 +12V only DC-in.
 AT auto power on function supported.
 Power Management
 ACPI (Advanced Configuration and Power Interface).
 Form Factor
 3.5" form factor.
All specifications and images are subject to change without notice.
Note
Introduction
CAPA520 Intel
®
i219LM supports 1000/100/10Mbps Gigabit/Fast Ethernet with
®
i211AT supports 1000/100/10Mbps Gigabit/Fast Ethernet with
®
i211AT supports 1000/100/10Mbps Gigabit/Fast Ethernet with
® TM
Core Processor Family 3.5" Board
3