OnRobot UR CB3 Series User Manual page 49

ADDITIONAL SOFTWARE OPTIONS
CAUTION:
During the update process (takes about 5-10 minutes) DO NOT unplug any
device or close the browser window. Otherwise the updated device could be
damaged.
The loading screens during the update process are the same for the software and the
firmware updates.
Software Update
Start the software update by clicking on the Browse button to browse for the. cbu software
update file.
Then the Browse button will turn to Update.
Click on that Update button to start the software update process, see below.
If the update is finished and was successful, the message below is shown.
Firmware Update
The firmware update is only required when any of the components is out of date.
49