Declaration Of Safety Conformity And Ul Marking; Inquiries - ABB PowerValue 11 RT G2 User Manual

6 A B B U P S P R O D U C T S A N D S O L U T I O N S
—

1 .3 Declaration of safety conformity and UL marking

The PowerValue 11 RT G2 1-3 kVA is designed,
manufactured and commercialized in accordance
with the EN ISO 9001 standard relating to quality
management systems.
These products conform with the
following directives:
• UL 1778: 2017 5th & CSA C22.2 No. 107.3-14
• FCC part 15, Class A
• 2011/65/EU Restriction of the use of certain
hazardous substances (RoHS) directive
WARNING
—

1 .4 Inquiries

Inquiries regarding the UPS should be
addressed to the local ABB office or agent
authorized by ABB. Note the type code and
the serial number of the equipment before
THIS EQUIPMENT HAS BEEN TESTED AND FOUND
TO COMPLY WITH THE LIMITS FOR A CLASS A
DIGITAL DEVICE, PURSUANT TO PART 15 OF THE
FCC RULES. THESE LIMITS ARE DESIGNED TO
PROVIDE REASONABLE PROTECTION AGAINST
HARMFUL INTERFERENCE WHEN THE
EQUIPMENT IS OPERATED IN A COMMERCIAL
ENVIRONMENT. THIS EQUIPMENT GENERATES,
USES, AND CAN RADIATE RADIO FREQUENCY
ENERGY AND, IF NOT INSTALLED AND USED IN
ACCORDANCE WITH THE INSTRUCTION MANUAL,
MAY CAUSE HARMFUL INTERFERENCE TO RADIO
COMMUNICATIONS. OPERATION OF THIS
EQUIPMENT IN A RESIDENTIAL AREA IS LIKELY
TO CAUSE HARMFUL INTERFERENCE IN WHICH
CASE THE USER WILL BE REQUIRED TO CORRECT
THE INTERFERENCE AT HIS OWN EXPENSE.
These products also meet the following
product standards:
—
Table 1: Standards
Product Standards
ESD IEC 61000-4-2 Level 3
IEC/EN 61000-2-2
Low Frequency Signals
Disturbing Voltage:10V
RS IEC61000-4-3 Level 3
EFT IEC 61000-4-4 Level 4
Surge IEC 61000-4-5 Level 4
CS IEC 61000-4-6 Level 3
Power Frequency Magnetic
IEC 61000-4-8 Level 4
Field Immunity
Conduction FCC part 15, Class A
Radiation FCC part 15 , Class A
Performance classification VFI-SS-III
Safety UL 1778: 2017 5th
Transportation IEC 60068-2-31
IEC 60068-2-64
IEC 60068-2-27
contacting ABB or authorized agent. The
serial number is shown on the nameplate
of the product. For further information on
troubleshooting, see Chapter 6.