Connection; Ups Input Connection; Ups Output Connection - ABB PowerValue 11 RT G2 User Manual

3 I N S TA L L AT I O N
—
Table 2: UPS rear panel connectors and ports
1
2
3
4
5
6
7
8
9
10
—

3 .4 Connection

3 .4 .1 UPS input connection

Plug the UPS into a proper socket (grounded
and shockproof) and pay attention to the socket
capacity. Avoid using extension cords. The UPS
system has an input breaker on the standard
cabinet.
• For PowerValue 11 RT G2 1/1.5/2 kVA models:
The power cord is supplied in the UPS package.
• For PowerValue 11 RT G2 3 kVA models: The
power cord is attached to the UPS.
• The input plug is a NEMA 5-15P for 1K and 1.5K
models, NEMA 5-20P for the 2K model,
and NEMA L5-30P for the 3K model.
NOTE
Model
PowerValue 11 RT G2 1 kVA
PowerValue 11 RT G2 1.5 kVA
PowerValue 11 RT G2 2 kVA
PowerValue 11 RT G2 3 kVA
Programmable outlets: connect to non-critical loads
Output receptacles: connect to mission-critical loads
AC input
Network/Fax/Modem surge protection
USB communication port
RS-232 communication port
SNMP intelligent slot
Emergency power off function connector (EPO)
External battery connection
Circuit breaker
To reduce the risk of fire, connect only to
a circuit provided with (@) A maximum
branch circuit overcurrent protection in
accordance with the National Electrical
Code, ANSI/NFPA 70, and the Canadian
Electrical Code, Part I, C22.1"

3 .4 .2 UPS output connection

The output sockets and types of the UPS are
shown below.
Model No .
PowerValue 11 RT G2 1 kVA
PowerValue 11 RT G2 1.5 kVA
PowerValue 11 RT G2 2 kVA
PowerValue 11 RT G2 3 kVA
There are two kinds of outputs: programmable
outlets and general outlets. Please connect non-
critical devices to the programmable outlets and
critical devices to the general outlets. During
power failure, you may extend the backup time to
critical devices by setting a shorter backup time
for non-critical devices.
(@)
20A
20A
20A
40A
15
Output Socket – NEMA(pcs)
8*NEMA 5-15R
8*NEMA 5-15R
8*NEMA 5-20R
6*NEMA 5-20R + 1*NEMA
L5-30R