Table of Contents
Advertisement
Turbidity and Suspended Solids Transmitter
DO 1 [ X ] Selected function
The selected function linked to digital output D01 is active (an "X" in the
check box).
DO 2 [ X ] Selected function
The selected function linked to digital output D02 is in the process
of being de-activated (an "X" in the check box).Digital output D02 for
Totalizer Forward is activated (a ticked check box).
DI [ ] Selected function
The selected function linked to digital input DI de-activated (an empty
check box). A "selected function" could for example be "Wiper".
mA output 10.234 mA
The present analog output current is 10.234 mA.Pending errors,
alarms, warnings and info are displayed for the selected in- or output.
Factory settings
The "Factory settings" menu provides resetting to the original factory set-
tings (except the language setting).
Status
DO 1 [ x ] Selected function
DO 1 [ \ ] Selected function
DI
[ ] Selected function
mA output
10,234 mA
Back
Select
Pending errors
xxx
xxx
Back
Select
Pending alarms
xxx
xxx
Back
Select
Pending warnings
xxx
xxx
Back
Select
EN 5.10 SuSix Manual 2007
Pending infos
xxx
Factory settings
Recover factory settings
Cancel
Default
Back
Select
OK
Ok
Ok
Ok
69
Service Menu
Type password
OK
Back
Select
Sensor Data
Converter SW. Ver.
Product data
Reset Counter Time
Internal meas. & cal.
Calibrate mA
Test Primary value
Read eventlog
Comunication log
Back On Stock
Back
Select
FW: 841013-005/843003-001
00000
>
Ok
Advertisement
Table of Contents
