Table of Contents
Advertisement
Turbidity and Suspended Solids Transmitter
Converter Setup
"Converter Setup" provides configuration options for calibration, alarms,
units, etc. See detailed descriptions in the following sections, and a con-
tinuous fold-out overview on page Gf-2 at the end of this manual.
1. Press the up/down keys to highlight the required menu line
(here: Converter Setup) and then press OK to select it.
2. Press the up/down keys to highlight the required option and then press
OK to select it.
Set Sensor Name
Set Sensor Name
SuSix1
Back
Select
Change password
Change password
The available options are described in detail in the following sections.
Back
Select
EN 5.10 SuSix Manual 2007
Converter Top Display
SuSix1
Meas.
Specify Main Screen
Data Logger
Password
Set Sensor Name
Converter Setup
Display Setup
Back
SuSix1
Converter Setup
Prim.
Second
Sensor Calibration
Averaging
Units
mA output
Cleaning
>
Solid curve
High Alarm
Low Alarm
Sensor error
Status
Factory settings
Service Menu
Back
0000
>
[X]
FTU
Select
Setup
Main Menu
Select
OK
[X]
mg/l
0.1%
Select
Setup
Select
OK
58
FW: 841013-005/843003-001
Converter Top Display
SuSix1
Meas.
Select
Main Menu
Specify Main Scree
Data Logger
Password
Set Sensor Name
Converter Setup
Display Setup
Back
Display Setup
Language
Set Clock
Modbus
Factory settings
Display SW version
Back
Select
[X]
FTU
Setup
Select
OK
Advertisement
Table of Contents
