Table of Contents
Advertisement
Turbidity and Suspended Solids Transmitter
Data Logger
SuSix® provides a data logger with a capacity of approx. 20,000 entry
points. See Appendix D on page
files.
The data logger operates after the FIFO principle (First In, First Out). If the
data logger is full and new data are coming in, the oldest data are dis-
carded.
1. Press the up/down keys to highlight the required menu line
(here: Data Logger) and then press OK to select it.
2. Press the up/down keys to change the highlighted digit, and then press
the right-key (>) to proceed to the next digit.
Specify Main Screen
Select line
Linie 1 - Sensor name
Linie 2 - Meas.
Linie 3 -
Linie 4 -
Linie 5
Back
Select
3. Continue until all digits have been set and press OK.
The log interval can be set in intervals from 10 seconds up to 9999
seconds.
Select line content
Not in use
Meas.
Homogeneity
Solid curve
Clock
Back
Select
EN 5.10 SuSix Manual 2007
Converter Top Display
SuSix1
Meas.
Select
Main Menu
Specify Main Screen
Data Logger
Password
Set Sensor Name
Converter Setup
Display Setup
Back
SuSix1
Data Logger
Prim.
Second
Set log interval
Select
Back
OK
Type password
OK
Back
[X]
107
for examples and descriptions of log
FTU
Setup
Select
OK
[X]
mg/l
0.1%
Setup
0010 sec
Select
>
Login
0000
51
Select
>
Converter Top Display
SuSix1
Meas.
Select
Main Menu
Specify Main Screen
Data Logger
Password
Set Sensor Name
Converter Setup
Display Setup
Back
Password
Login
Activate/deactivate
Change password
Back
Select
Activate/
Deactivate
Activate
Deactivate
FW: 841013-005/843003-001
Back
Select
[X]
FTU
Setup
Select
OK
S
S
SuSix1
Back
OK
C
Ch
OK
Back
Advertisement
Table of Contents
