Device settings
Default
Restart device
Firmware
Status
pHix Link software /General information
Click Device with cog-wheel on the top bar. This will open
the Device functions menu.
This function will delete all data and setups and will
set the unit to corresponding default factory setup.
4.6 pH default
7.0 pH default
Redox default
The sensor is restarted
Check for new firmware version
Load and flash firmware file
Factory firmware
Change the status for
Liquid ground
Switch ring
Tilt
pHix® Compact V3. NG (next generation)
EN 4.10 Version 2103
44