Save Log Data; Upgrade Display Firmware - Xylem MJK SuSix Installation And User Manual

Turbidity and Suspended Solids Transmitter
B. Save Log Data
1. Select "LogData" in the menu bar and click "Save Log to File".
2. Assign a file name, find the destination you want to save the file to, and
click "Save". Consequently the file is saved, and the contents is displayed.
C. Upgrade Display Firmware
Important: Always upgrade the display firmware before you upgrade
the converter software.
1. Select "Firmware" in the menu bar and click "Display".
2. Locate the "MJK Field FW" directory on the CD-ROM, select the
841xxx-xxx.hex file (or similar 841*.hex) and click "Open".
3. Click OK when the "Display Firmware" dialogue box appears and
prompts for programming the display Flash memory.
The display unit firmware is then transferred, and the display unit is
consequently programmed. Expect this process to take a few minutes.
EN 5.10 SuSix Manual 2007 102 FW: 841013-005/843003-001