Table of Contents
Advertisement
Modbus
The SuSix
four SuSix
operation.
>
10:53:12
Add device
Scanning
>
Back
Devices found
Device 1
Back
Select
When several converters are to be added, it is necessary to change each
converter device address to a unique ID address before connecting the
converter to the Display Unit.
Add device
Four SuSix
RS485 interface connection. Note that only one Display Unit can be used
with several converters.
The Display Unit can easily be moved to another converters for readout
and configuration.
1. Select "Add Device", click OK and wait for the scan process to finish.
2. The found converters are finally displayed.
EN 5.10 SuSix Manual 2007
Turbidity and Suspended Solids Transmitter
is delivered with a standard Modbus RTU protocol, and up to
®
and/or MagFlux
®
Change device addresse
Change device addresse
Device 1
Back
Select
Change device 1
OK
Back
Select
Converters can be connected to one Display Unit using the
®
2 - Display Setup
converters can be connected for concurrent
®
Modbus
Add device
Change device addresse
Remove device
Change controller ID
Back
Select
OK
Remove device
Remove device
Device 1
OK
Back
OK
82
Factory settings
Cancel
Delete log
Restore default language
Restore factory setting
Back
Change controller ID
Change controller ID
Select
OK
Back
Number of controllers
Back
FW: 841013-005/843003-001
Display S
Display
SW
July 14
Language
Select
OK
Back
1
Select
OK
1
Select
OK
Advertisement
Table of Contents
