Operation Methods; Measure For Safety; Checking The Finished Connections; Confirmation On The Cutting Torch - Panasonic YP-060PF Operating Instructions Manual

9 Operation methods

9.1 Measure for safety

DANGER
● Cutting operations in narrow spaces may cause asphyxia due to lack of oxygen.
● Prepare ventilation facilities to prevent the inhalation of gases and fumes generated during the cutting
operation or wear a respirator.
WARNING
●Wear specialized protective clothing, including gloves and safety shoes to
protect exposed parts of your skin
●Wear light-shielding glasses or cutting face-shield with shielding filter plate to
protect your eyes.

9.2 Checking the finished connections

See "5. Configuration" and recheck that all connections are completed.

9.3 Confirmation on the cutting torch

Before confirming the cutting torch, please be sure to turn off the power switch of
the Product.
Otherwise, during confirmation, if the cutting torch switch is pressed, air can blow
from cutting tip end and high voltage can be generated, causing the hazards of
fatal electric shock and being burnt.
burn.
· Replace tip or electrode after turning off the power supply.
·During cutting, do not touch cutting tip and electrode of the cutting torch end.
Please execute according to the below mentioned sequence.
(1) Confirm distribution box switch and power switch.
(2) Confirm whether or not the electrode and cutting tip of the cutting torch is consumed.
(3) When electrode and cutting tip are consumed and wear and tear happens, replace them with new parts.
Plasma arc exposure against a body part such as hand or finger may cause a
To protect you and other people from gases, fumes and
lack of oxygen that may be generated during cutting
operation, make sure to prepare ventilation facilities and
use protective equipment, etc.
To protect operators from arc
light, fume, spatter and slug,
and noise produced during
cutting operation, make sure to
wear protective equipment
correctly.
WARNING
WARNING
37