Thermal Protection; Cooling Fan Stop Function - Panasonic YP-060PF Operating Instructions Manual

3 Rated Specifications (continuous)

3.5 Thermal protection


Cutting power source is equipped with a thermal switch at the radiator fin of IGBT to monitor the
temperature.

When the abnormal temperature happens, the thermal switch takes action and cut off the output.

Please be sure not to use under the conditions listed here:
•Over the rated output voltage
•The air inlet or outlet is blocked
•The ambient temperature is higher than 40 °C
•The cooling fan stops

3.6 Cooling fan stop function


Cooling fan can stop to save energy and machine runs into energy saving state 7 minutes after the
cutting machine remains in the stand-by state.

Cooling fan starts immediately after the power switch is turned on.

Once cutting operation restarts, the cooling fan rotates again.
7