Settings And Operations; Power (On) / (Off); Initial Display - Panasonic YP-060PF Operating Instructions Manual

8 Settings and Operations

8.1 Power (ON) / (OFF)

Front
Note:
· When a generator is used, please be sure to
turn off power switch of the Machine before
starting up generator.
· Regarding the cooling fan
-after turning on the power switch, the fan starts
rotate
-if stand-by status lasts over 7 minutes, the fan
stop rotating and machine runs into the
power-saving mode.
-when the cooling fan stops, press the cutting
torch switch the fan rotates again.

8.2 Initial display

When the power is turned on, initial information is
displayed as follows:
(1) Every LED lights up for LED testing and goes
① ② ③ ④ ⑤
out in the order of ,
1
3
Power switch
, , , .
2
5
4
(2) The following product information is displayed
on the digital display.
(2-1) DPS number (Software ID Number)
(2-2) Version number
< Note >
·If any error occurs at the time of startup, digital
display shows "E" and error number. For the
description of the error number, please refer to
【13.1 Error numbers and descriptions】.
·These numbers act as examples. There may
some differences with actual displayed numbers.
(3) After the version number is displayed and
every LED goes off, the machine runs into
stand-by mode and the previously set cutting
current settings is displayed.
The default setting is rated output current value.
21