Panasonic YP-060PF Operating Instructions Manual page 3

Features
·PF3 series machine is an energy saving, compact and light weighted plasma cutting machine controlled
by new type inverter technology.
·The contact and non-contact cutting mode can be selected. The main circuit equipped with pilot arc
circuit is able to start the arc instantly with excellent performance.
·Two functions: plasma cutting and plasma gouging.
·Applicable for the cutting of thin and medium plate of carbon steel, stainless steel and aluminum etc.
The maximum cutting thickness is 40mm.
·The cutting navigation function is easy-to-use and suitable for beginners.
·The cutting torch monitoring function provides digital alarm display for electrode replacement,
prolonging the life span of cutting torch.
·The built-in pressure sensor enables the machine to send the digital alarm display notification. The
machine can be cut off in case the air pressure overpasses the recommend range, improving the cutting
quality.
·The built-in automatic water draining filter is easy-to-use.
·The updated cutting torch offers the outstanding cutting result of smooth and beautiful surface and
prolongs the service life of the consumables.
Before use
Please read below information before use:
·Before changing the parts on the top of the cutting torch, be sure to turn off the power distribution box
switch or the power switch of the machine.
·The dust, like iron powder etc. can be generated during cutting, please prepare the dust-collecting
device.